Arabic/Islamic Designs Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-category/arabic-islamic-designs/ Tue, 19 May 2026 11:55:26 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0 https://manchesterlasercuts.co.uk/wp-content/uploads/2023/06/MLC-LOGO-350x350-1-100x100.jpg Arabic/Islamic Designs Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-category/arabic-islamic-designs/ 32 32 Ramadan Token https://manchesterlasercuts.co.uk/product/ramadan-token/ Tue, 10 Feb 2026 06:24:45 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79355
  • Plywood
  • 5cm
  • Engraved token

    • The post Ramadan Token appeared first on Manchester Laser Cuts.

    ]]>     Ramadan Token

    These Ramadan Token is made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Ramadan Token appeared first on Manchester Laser Cuts.

    ]]>         Sprinkles of Sunnah https://manchesterlasercuts.co.uk/product/sprinkles-of-sunnah/ Tue, 10 Feb 2026 06:16:02 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79353
  • Plywood
  • 12CM Long
  • Engraved sign
  • acrylic white word sprinkles to be glued

    • The post Sprinkles of Sunnah appeared first on Manchester Laser Cuts.

    ]]>     Sprinkles of Sunnah

    These Sprinkles of Sunnah is made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Sprinkles of Sunnah appeared first on Manchester Laser Cuts.

    ]]>         Croissant and Quran https://manchesterlasercuts.co.uk/product/croissant-and-quran/ Tue, 10 Feb 2026 06:08:47 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79351
  • Plywood
  • 12CM Long
  • Engraved sign
  • acrylic brown croissant to be glue

    • The post Croissant and Quran appeared first on Manchester Laser Cuts.

    ]]>     Croissant and Quran

    These Croissant and Quran is made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Croissant and Quran appeared first on Manchester Laser Cuts.

    ]]>         Eid Menu https://manchesterlasercuts.co.uk/product/eid-menu/ Tue, 10 Feb 2026 06:00:09 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79349
  • Plywood
  • 10CM Long
  • Engraved sign

    • The post Eid Menu appeared first on Manchester Laser Cuts.

    ]]>     Eid Menu

    These Eid Menu is made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Eid Menu appeared first on Manchester Laser Cuts.

    ]]>         Big Faith Little Scholar Sign ply https://manchesterlasercuts.co.uk/product/big-faith-little-scholar-sign-ply/ Tue, 10 Feb 2026 05:49:04 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79346
  • Plywood
  • 10CM Long
  • Engraved sign

    • The post Big Faith Little Scholar Sign ply appeared first on Manchester Laser Cuts.

    ]]>     Big Faith Little Scholar Sign ply

    These Big Faith Little Scholar Sign ply you are made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Big Faith Little Scholar Sign ply appeared first on Manchester Laser Cuts.

    ]]>         Eid Moon and Back Tag https://manchesterlasercuts.co.uk/product/eid-moon-and-back-tag/ Mon, 09 Feb 2026 17:51:04 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=79339
  • Plywood
  • 12CM Long
  • Tag comes with hole

    • The post Eid Moon and Back Tag appeared first on Manchester Laser Cuts.

    ]]>     Eid Moon and Back Tag

    These Eid Moon and Back Tag you are made from plywood.

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Eid Moon and Back Tag appeared first on Manchester Laser Cuts.

    ]]>         Islamic Wall Art Laser Cut https://manchesterlasercuts.co.uk/product/islamic-wall-art-laser-cut/ Fri, 07 Feb 2025 12:38:51 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=71056
  • Unique Design
  • various sizes
  • 3mm mdf or acrylic
  • Spraying option
  • PLEASE NOT - GOLD AND SILVER SHIMMER IS NOT MIRROR ACRYLIC. IT'S A METALLIC ACRYLIC WITH A GLITTERY SHIMMER TO IT.

    • The post Islamic Wall Art Laser Cut appeared first on Manchester Laser Cuts.

    ]]>     Islamic Wall Art Laser Cut

    These Islamic Wall Art Laser Cut are made from 3mm mdf or Acrylic

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Islamic Wall Art Laser Cut appeared first on Manchester Laser Cuts.

    ]]>         The Four Quls Islamic Wall Art Laser Cut https://manchesterlasercuts.co.uk/product/the-four-quls-islamic-wall-art-laser-cut/ Fri, 07 Feb 2025 12:26:28 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=71034
  • Unique Design
  • various sizes
  • 3mm mdf or acrylic
  • Spraying option
  • PLEASE NOT - GOLD AND SILVER SHIMMER IS NOT MIRROR ACRYLIC. IT'S A METALLIC ACRYLIC WITH A GLITTERY SHIMMER TO IT.

    • The post The Four Quls Islamic Wall Art Laser Cut appeared first on Manchester Laser Cuts.

    ]]>     The Four Quls Islamic Wall Art Laser Cut

    These The Four Quls Islamic Wall Art Laser Cut are made from 3mm mdf or Acrylic

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post The Four Quls Islamic Wall Art Laser Cut appeared first on Manchester Laser Cuts.

    ]]>         Laser Cut Alhamdulillah Islamic Table Decor https://manchesterlasercuts.co.uk/product/laser-cut-alhamdulillah-islamic-table-decor/ Thu, 06 Feb 2025 21:51:59 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=71011
  • Unique Design
  • various sizes
  • 3mm mdf or acrylic
  • Spraying option
  • PLEASE NOT - GOLD AND SILVER SHIMMER IS NOT MIRROR ACRYLIC. IT'S A METALLIC ACRYLIC WITH A GLITTERY SHIMMER TO IT.

    • The post Laser Cut Alhamdulillah Islamic Table Decor appeared first on Manchester Laser Cuts.

    ]]>     Laser Cut Alhamdulillah Islamic Table Decor

    These Laser Cut Alhamdulillah Islamic Table Decor are made from 3mm mdf or Acrylic

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Laser Cut Alhamdulillah Islamic Table Decor appeared first on Manchester Laser Cuts.

    ]]>         Laser Cut Mashallah Teardrop 3D Islamic Wall Art https://manchesterlasercuts.co.uk/product/laser-cut-mashallah-teardrop-3d-islamic-wall-art/ Thu, 06 Feb 2025 21:47:49 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=70979
  • Unique Design
  • various sizes
  • 3mm mdf or acrylic
  • Spraying option
  • PLEASE NOT - GOLD AND SILVER SHIMMER IS NOT MIRROR ACRYLIC. IT'S A METALLIC ACRYLIC WITH A GLITTERY SHIMMER TO IT.

    • The post Laser Cut Mashallah Teardrop 3D Islamic Wall Art appeared first on Manchester Laser Cuts.

    ]]>     Laser Cut Mashallah Teardrop 3D Islamic Wall Art

    These Laser Cut Mashallah Teardrop 3D Islamic Wall Art are made from 3mm mdf or Acrylic

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Laser Cut Mashallah Teardrop 3D Islamic Wall Art appeared first on Manchester Laser Cuts.

    ]]>