CHRISTMAS 2026 Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-category/christmas-2026/ Wed, 15 Jul 2026 12:41:33 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0.1 https://manchesterlasercuts.co.uk/wp-content/uploads/2023/06/MLC-LOGO-350x350-1-100x100.jpg CHRISTMAS 2026 Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-category/christmas-2026/ 32 32 Stag wall art https://manchesterlasercuts.co.uk/product/stag-wall-art/ Wed, 15 Jul 2026 12:39:13 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80951
  • Made from 3mm mdf
  • 20cm Tall
  • Great for painting
  • comes with stand

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Stag wall art appeared first on Manchester Laser Cuts.

    ]]>     Stag wall art

    Stag wall art 20cm Tall (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Stag wall art appeared first on Manchester Laser Cuts.

    ]]>         Deer in the Woods https://manchesterlasercuts.co.uk/product/deer-in-the-woods/ Wed, 15 Jul 2026 12:34:25 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80950
  • Made from 3mm mdf
  • 20cm Tall
  • Great for painting
  • comes with stand

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Deer in the Woods appeared first on Manchester Laser Cuts.

    ]]>     Deer in the Woods

    Deer in the Woods 20cm Tall (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Deer in the Woods appeared first on Manchester Laser Cuts.

    ]]>         Money Reindeer Hanger https://manchesterlasercuts.co.uk/product/money-reindeer-hanger/ Wed, 15 Jul 2026 12:05:56 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80941
  • Made from 3mm mdf
  • 17cm Tall
  • Great for painting
  • Layered Designs requires glue
  • comes with plastic money holder self adhesive

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Money Reindeer Hanger appeared first on Manchester Laser Cuts.

    ]]>     Money Reindeer Hanger

    Money Reindeer Hanger 17cm Tall  (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Money Reindeer Hanger appeared first on Manchester Laser Cuts.

    ]]>         Christmas Tree Box https://manchesterlasercuts.co.uk/product/christmas-tree-box/ Wed, 15 Jul 2026 11:42:01 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80935
  • Made from 3mm mdf
  • 30cm Tall
  • Approx 14cm Wide
  • Great for painting
  • Layered Designs requires glue

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Christmas Tree Box appeared first on Manchester Laser Cuts.

    ]]>     Christmas Tree Box

    Christmas Tree Box 30cm Tall  (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Christmas Tree Box appeared first on Manchester Laser Cuts.

    ]]>         Elf Cam Bow https://manchesterlasercuts.co.uk/product/elf-cam-bow/ Wed, 10 Jun 2026 05:46:18 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80797
  • Made from 3mm mdf
  • 20cm Tall
  • Great for painting
  • Layered designs requires glue

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Elf Cam Bow appeared first on Manchester Laser Cuts.

    ]]>     Elf Cam Bow

    Elf Cam Bow (3mm mdf)

    Personalising  your Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Elf Cam Bow appeared first on Manchester Laser Cuts.

    ]]>         Layered Elf Legs https://manchesterlasercuts.co.uk/product/layered-elf-legs/ Wed, 10 Jun 2026 05:31:19 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80795
  • Made from 3mm mdf
  • 40cm Tall
  • Great for painting
  • Layered designs requires glue

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Layered Elf Legs appeared first on Manchester Laser Cuts.

    ]]>     Layered Elf Legs

    Layered Elf Legs (3mm mdf)

    Personalising  your Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Layered Elf Legs appeared first on Manchester Laser Cuts.

    ]]>         Personalised Christmas Baubles https://manchesterlasercuts.co.uk/product/personalised-christmas-baubles/ Wed, 10 Jun 2026 05:19:09 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80790
  • Made from 3mm mdf
  • 4 Designs
  • Great for painting
  • Personalised.
  • Layered designs requires glue
  • Approx 12cm high

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Personalised Christmas Baubles appeared first on Manchester Laser Cuts.

    ]]>     Personalised Christmas Baubles

    Personalised Christmas Baubles (3mm mdf)

    Personalising  your Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Personalised Christmas Baubles appeared first on Manchester Laser Cuts.

    ]]>         Christmas Door Hanger https://manchesterlasercuts.co.uk/product/christmas-door-hanger/ Sun, 07 Jun 2026 21:00:56 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80754
  • Made from 3mm mdf
  • 20 x 24cm
  • Great for painting
  • comes with stand.
  • Layered designs requires glue

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Christmas Door Hanger appeared first on Manchester Laser Cuts.

    ]]>     Christmas Door Hanger

    Christmas Door Hanger (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Christmas Door Hanger appeared first on Manchester Laser Cuts.

    ]]>         Nativity Cut Out https://manchesterlasercuts.co.uk/product/nativity-cut-out/ Sun, 07 Jun 2026 20:57:14 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80752
  • Made from 3mm mdf
  • Approx a4 size
  • Great for painting
  • comes with stand.

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Nativity Cut Out appeared first on Manchester Laser Cuts.

    ]]>     Nativity Cut Out

    Nativity Cut Out (3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Nativity Cut Out appeared first on Manchester Laser Cuts.

    ]]>         Christmas Characters https://manchesterlasercuts.co.uk/product/christmas-characters/ Sun, 07 Jun 2026 20:48:24 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=80747
  • Made from 3mm mdf
  • Various Designsavailable
  • Great for painting
  • comes with stand.

    • PLEASE NOTE, PAINTED PIC IS FOR SHOW, THIS ITEM COMES UNPAINTED IN BROWN MDF. HAPPY PAINTING

    The post Christmas Characters appeared first on Manchester Laser Cuts.

    ]]>     Christmas Characters

    Christmas Characters(3mm mdf)

    Personalised Items

    Important

    When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

    Orders are cut exactly as asked. Once cut no changes can be made.

    Things you should know

    Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

    Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

    We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

    We supply unpainted, raw wood so that crafters can paint and decorate.

    Delivery of your Items

    All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

    We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

    We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

    About the Wood/Acrylic

    The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

    Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

    4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

    All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

    We do care. 

    Pictures on the website

    We are more than happy for any of our lovely customers to use our images from the website.

    For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

    The post Christmas Characters appeared first on Manchester Laser Cuts.

    ]]>