These Layered Personalised Highland Cow are made from 3mm mdf

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Layered Personalised Highland Cow appeared first on Manchester Laser Cuts.

18mm Sitting Bunny (3mm mdf)

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post 18mm Sitting Bunny appeared first on Manchester Laser Cuts.

Antler Freestanding Letters, 18mm Thick  20cm Tall with name

any names can be added.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Antler Freestanding Letters appeared first on Manchester Laser Cuts.

These A4 Board/Tray 18mm thick are made from 18mm mdf wood

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post A4 Board/Tray 18mm thick appeared first on Manchester Laser Cuts.

These 18mm Freestanding Personalised Reindeer Head Sign are made from brown mdf

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post 18mm Freestanding Personalised Reindeer Head appeared first on Manchester Laser Cuts.

These Freestanding Animals in Wellies are made from 18mm mdf

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Freestanding Animals in Wellies appeared first on Manchester Laser Cuts.

These Freestanding White Covered Frame are made from 18mm MDF with a layer of white mdf.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Freestanding White Covered Frame appeared first on Manchester Laser Cuts.

These 40CM Standing Heart are made from 6mm mdf AND A 18mm stand

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post 40CM Standing Heart appeared first on Manchester Laser Cuts.

This Doggy Stair Stopper (sausage stopper) is made from 9mm thick mdf wood

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Doggy Stair Stopper (sausage stopper) appeared first on Manchester Laser Cuts.

This 18mm Collapsible Display Stand made from 18mm MDF

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post 18mm Collapsible Display Stand appeared first on Manchester Laser Cuts.