Wooden Mdf Letters 1.7cm High (3mm mdf)

FOR NAMES THAT GO ACROSS THE LETTERS…………You can use this link . We used the 6cm tall name to fit across the 20cm letter follow this link to purchase the names

https://manchesterlasercuts.co.uk/shop/name-place-settings/

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post GEORGIA BOLD Letters 1.7cm High RB LISTING appeared first on Manchester Laser Cuts.

These Bee In Flower Frames are made from 3mm brown mdf

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Bee In Flower Frame appeared first on Manchester Laser Cuts.

This We go together Wine Butlers Holder is made from 4mm veneered oak

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post We go together Wine Butlers appeared first on Manchester Laser Cuts.

These Cute Cat Jigsaw Puzzle, are made from 3mm white mdf.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Cute Cat Jigsaw Puzzle appeared first on Manchester Laser Cuts.

Birthday Countdown Board(4mm oak) . Perfect way of keeping memories.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Birthday Countdown Board appeared first on Manchester Laser Cuts.

Sleeps until Santa Visits Board(4mm oak) . Perfect way of keeping memories.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Sleeps until Santa Visits Board appeared first on Manchester Laser Cuts.

Christmas House scene. Perfect way of keeping memories.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Christmas House scene appeared first on Manchester Laser Cuts.

Sleeps until Santa Spinner (4mm oak) . Perfect way of keeping memories.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Sleeps until Santa Spinner appeared first on Manchester Laser Cuts.

Dear Santa Board(4mm oak) . Perfect way of keeping memories.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Dear Santa Board appeared first on Manchester Laser Cuts.

These My Greatest Blessing Sign are something a little cute for christmas x

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post My Greatest Blessing Sign appeared first on Manchester Laser Cuts.