, 3mm mdf

we can cut these in lots of sizes, please ask.

This Hoop has a beautiful finish and looks amazing with macrame on. They look beautiful at weddings, you can view our other wedding items here https://manchesterlasercuts.co.uk/product-category/wedding/

We have found this amazing site which allows you to enter your date and amount of guest and it will search venues in Manchester for you, I hope this is helpful, take a look https://www.tagvenue.com/hire/affordable-wedding-venues/manchester

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Happy Chanukah Hoop appeared first on Manchester Laser Cuts.

These beautiful linen camping cushions are printed with a stunning camping design and surname of your choice

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Camping Cushion appeared first on Manchester Laser Cuts.

These engraved spoon’s are solid bamboo spoons with any wording engraved on the handles.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Engraved Spoon appeared first on Manchester Laser Cuts.

These Robin on a Spade Robin in the Moon is made from 3mm mdf with a white base.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Robin on a Spade appeared first on Manchester Laser Cuts.

These Highland Cow Name Place Setting are most popular for the Christmas table and party place settings at table. The best size for that is 3cm high, but we can do these much bigger please just ask.

For more wedding items check here https://manchesterlasercuts.co.uk/product-category/wedding/

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Highland Cow Name Place Setting appeared first on Manchester Laser Cuts.

These Robin in the Moon is made from 3mm white mdf with a layered robin.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Robin in the Moon appeared first on Manchester Laser Cuts.

These Save the Date Various Designs is made from 3mm layered plywood.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Save the Date Various Designs appeared first on Manchester Laser Cuts.

This Autumn Wreath are a perfect size at 30cm made from 3mm mdf.

For more wedding items check here https://manchesterlasercuts.co.uk/product-category/wedding/

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Autumn Wreath appeared first on Manchester Laser Cuts.

Our Personalised Wooden Wedding Heart Name Place Setting 4mm Veneered Oak

For more Christmas items see here https://manchesterlasercuts.co.uk/product-category/seasonal/christmas/

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Personalised Wooden Wedding Heart Name Place Setting appeared first on Manchester Laser Cuts.

Our Personalised Wooden Wedding Heart Table Confetti 3mm mdf or Oak

For more Christmas items see here https://manchesterlasercuts.co.uk/product-category/seasonal/christmas/

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Personalised Wooden Wedding Heart Table Confetti appeared first on Manchester Laser Cuts.