Angel Star (3mm mdf) 15 x 15cm

The Stem is small on this topper. You just need a little wire to wrap around the top of your Christmas tree.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Angel Star appeared first on Manchester Laser Cuts.

Christmas Road Sign
These Road Sign comes in various sizes. You can choose from MDF or Oak.

This is a two layer sign so the frame and wording come separate for you to glue on after painting.

They come with stencil for correct placing and spacing of letters.

Please note painted image is an example only.

For more Christmas items see here https://manchesterlasercuts.co.uk/?s=christmas&post_type=product

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Christmas Road Sign appeared first on Manchester Laser Cuts.

Jolly Christmas Tree (3mm mdf) 30cm tall

This tree reads Tis the season to be jolly.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Jolly Christmas Tree appeared first on Manchester Laser Cuts.

Christmas Tree with Personalised Bauble (3mm mdf) 20 cm tall

This Christmas tree has star details with a hanging personalised bauble.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Christmas Tree with Personalised Bauble appeared first on Manchester Laser Cuts.

Heart Bee/ Butterfly Bauble (3mm mdf) 10cm

We have a huge love for bees and this beautiful Heart Bee bauble, is another beautiful cut. We enjoy designing and making beautiful bee products for you. If you have any ideas in mind that you would like me to bring to life,  please don’t hesitate in contacting me. We love a nice challenge and making your ideas become a reality.

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Heart Bee/ Butterfly Bauble appeared first on Manchester Laser Cuts.

9cm made from  3mm mdf

When you are ordering Personalised Items, please make sure your spelling is all correct. as we copy and paste your text.

we cut the orders exactly as you would like them, as we copy and paste your text.

All our items will come flat pack to you, some of our products require for you to add touch of glue to them, and some will slot together without glue. we will state this on the listing.

you check out our other Generic Gifts here https://old.manchesterlasercuts.co.uk/product-category/best-sellers/

Or for painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

How you receive your wood.

Many of our products are individually handmade/cut from wood.

slight variation in colour or grain of wood, or surface pattern may occur. Handmade and wooden items vary, and it must be accepted by the customer that no two of a kind will ever be identical, and no surfaces will ever be the same as wood grain differs.

Please note:the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Which means, all of our laser cut items edges will be dark brown or black. you may need either a light sanding in the case of wood products. the protective film removed in the case of acrylic/plastic products.

The woods/Acrylic we use are.

our MDF is Medite laser MDF at 3mm Thick, The best we can use.3mm laser plywood we use, is poplar ply. It is a lovely light wood which looks beautiful engraved. The acrylic that is used is 3mm. but other thickness are available if needed, please just enquire. and the only oak that is used is 4mm veneered oak. Our Vaneered Oak is MDF which has a covering of oak, It has a very beautiful finish.

The wood we supply is unpainted, raw wood so that crafters can paint and decorate.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions, and is produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting. which makes it more environmentally friendly.

We have also hugely cut down the amount of plastics we are using. You may have noticed this by receiving your packages, in cardboard boxes and no bubble wrap.

we have replaced this with hard brown wrapping paper. We also have had less damaged products which makes us all happy.

Our forests give us many things like books, tissues and the we use furniture and so much more. The Forest Stewardship Council (FSC), helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are happy for any of our lovely customers, to use any of our pictures from the website.

The post Round Bee bauble appeared first on Manchester Laser Cuts.