freestnding Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-tag/freestnding/ Wed, 24 Sep 2025 10:49:04 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://manchesterlasercuts.co.uk/wp-content/uploads/2023/06/MLC-LOGO-350x350-1-100x100.jpg freestnding Archives - Manchester Laser Cuts https://manchesterlasercuts.co.uk/product-tag/freestnding/ 32 32 220640087 Free Standing Layered Circle Bee https://manchesterlasercuts.co.uk/product/free-standing-layered-circle-bee-copy/ Thu, 17 Mar 2022 10:53:29 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=60973 Free Standing Layered Circle Bee

This Free Standing Layered Circle Bee is 18mm thick, with a layered 3mm bee which can be glued on top, approx 20cm

The post Free Standing Layered Circle Bee appeared first on Manchester Laser Cuts.

]]> Free Standing Layered Circle Bee

This Free Standing Layered Circle Bee is 18mm thick, with a layered 3mm bee which can be glued on top,  approx 20cm

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Free Standing Layered Circle Bee appeared first on Manchester Laser Cuts.

]]> 60973 12mm Plaque with bottle opener https://manchesterlasercuts.co.uk/product/12mm-plaque-for-bottle-opener/ Wed, 19 Jan 2022 07:02:23 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=53966 12mm Plaque for bottle opener

this 12mm Plaque for bottle opener is 30 x 10cm, with a bottle opener which fits the board, we do not screw the opener on the sign, this is supplied separately with screws

The post 12mm Plaque with bottle opener appeared first on Manchester Laser Cuts.

]]> 12mm Plaque for bottle opener

this 12mm Plaque for bottle opener is 30 x 10cm, with a bottle opener which fits the board, we do not screw the opener on the sign, this is supplied separately with screws

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post 12mm Plaque with bottle opener appeared first on Manchester Laser Cuts.

]]> 53966 Free Standing Layered Bee https://manchesterlasercuts.co.uk/product/free-standing-layered-bee/ Sun, 16 Jan 2022 14:33:07 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=53616 Free Standing Layered Bee

This Free Standing Layered Bee is 18mm thick, with a layered 3mm bee which can be glued on top, stands 20cm tall by approx 23cm wide

The post Free Standing Layered Bee appeared first on Manchester Laser Cuts.

]]> Free Standing Layered Bee

This Free Standing Layered Bee is 18mm thick, with a layered 3mm bee which can be glued on top, stands 20cm tall by approx 23cm wide

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Free Standing Layered Bee appeared first on Manchester Laser Cuts.

]]> 53616 Free Standing Kinder Bunny with Layered Ears https://manchesterlasercuts.co.uk/product/free-standing-kinder-bunny-with-layered-ears/ Sun, 16 Jan 2022 14:01:23 +0000 https://manchesterlasercuts.co.uk/?post_type=product&p=53604 Free standing Kinder Bunny with layered Ears

this Free standing Kinder Bunny with layered Ears is made from 12mm mdf and the ear comes separate to stick on, made from 3mm mdf. This Bunny fits a kinder Egg (Egg is not supplied)

The post Free Standing Kinder Bunny with Layered Ears appeared first on Manchester Laser Cuts.

]]> Free Standing Kinder Bunny with Layered Ears

This Free Standing Kinder Bunny with Layered Ears, is made from 12mm mdf and the ear comes separate to stick on, made from 3mm mdf. This Bunny fits a kinder Egg (Egg is not supplied)

Personalised Items

Important

When ordering personalised items, please make sure all spellings are correct. We copy and paste your text.

Orders are cut exactly as asked. Once cut no changes can be made.

Things you should know

Many of our products are individually handmade/cut from wood. Slight variation in colour, grain of wood, or surface pattern may occur. Handmade and wooden items vary. It must be accepted by the customer that no two of a kind products will ever be identical.

Please note the colours you see may vary slightly from how you see it on the website due to screen display settings.

We cut many of our items on a laser, which uses laser heat to burn through the material. Therefore, on all of the laser cut items edges there will be dark brown or black markings. Remove with light sanding. Our acrylic/plastic items will have a protective film to remove.

We supply unpainted, raw wood so that crafters can paint and decorate.

Delivery of your Items

All our items will arrive flat pack to you. Some of our products require for you to add a touch of glue to them but some slot together without glue. This will be stated on the listing.

We have also hugely cut down the amount of plastics we are using. You may have noticed this when receiving your packages that they are in cardboard boxes and contain no bubble wrap.

We have replaced this with hard brown wrapping paper; this has resulted in less damaged products which makes us all happy.

About the Wood/Acrylic

The acrylic we use is 3mm but we can get thicker if needed. Please ask if you require this.

Our MDF is Medite laser MDF at 3mm thick. We use 3mm laser plywood, poplar ply, it is a lovely light wood. It looks beautiful engraved.

4mm veneered oak is the only oak we use. Our Veneered Oak is MDF which has a covering of oak; it has a very beautiful finish.

All our wood is laser grade MDF, EU class E1, which means low formaldehyde emissions. Produced to FSC (Forest Stewardship Council) certification. It is this low formaldehyde emission, which makes this MDF suitable for laser cutting therefore making it more environmentally friendly. The Forest Stewardship Council (FSC) helps take care of forests and the people and wildlife, who call them home.

We do care. 

Pictures on the website

We are more than happy for any of our lovely customers to use our images from the website.

For painted gifts, We have a lovely sister page you can visit at http://www.handcraftedgems.co.uk

The post Free Standing Kinder Bunny with Layered Ears appeared first on Manchester Laser Cuts.

]]> 53604